Do's and Do not's
of 
AquaBoost AG30 Liquids

• Do apply AquaBoost at the first irrigation application for the season for maximum benefit.
• Do apply AquaBoost at the start of an irrigation event; there is no benefit in wetting the soil first. 
• Do apply at the recommended application rates. 
• Do introduce AquaBoost downstream of the primary filtration. 
• Do apply AquaBoost at your crops point of peak water demand. 
• Do note that AquaBoost can improve fertilizer efficacy. 
• Do create lateral movement of water in the soil by adding AquaBoost to your irrigation water. 
• Do use AquaBoost in any irrigation system. 
• Do add AquaBoost directly into the irrigation water.  There is no requirement for pre-mixing. 
• Do apply AquaBoost to improve the soil’s initial wet-up. 
• Do apply AquaBoost prior to your plant’s periods of peak water demand. 
• Do apply AquaBoost prior to expected periods of high temperatures or hot winds to minimize plant stress. 
• Do, where possible, use AquaBoost in conjunction with moisture monitoring to obtain maximum water savings. 
• Do re-apply AquaBoost each 8-10 weeks or at 6 weeks in areas of high soil microbiology. 
• Do note that AquaBoost can extend the half-life of herbicides. 
• Do note that AquaBoost will not cause phototoxicity.

• Do NOT mix AquaBoost in a tank with Gypsum products. 
• Do NOT mix AquaBoost in a tank with Calcium products. 
• Do NOT mix AquaBoost in a tank with Potassium Nitrate. 
• Do NOT mix AquaBoost in a tank with Non Chelated metallic micronutrients. 

(Non Chelated metallic micro nutrients and water with HIGH IRON content may cause shearing of the AquaBoost linear polymer and reduce the products efficacy, if this is a problem increase the application rate of AquaBoost AG).
 
The above “Do Not’s” don’t create any problems once AquaBoost is in the Soil.